Testarossa Progress

Haven't updated much but here is what I have done up to now. Just going to wait for the weather to warm up so I can start priming parts.

Engine block/transmission all put together.

 Noticed an indent on the dashboard.

 Even though this part of the rear arches may not be seen, when I test fitted the body to the chassis, I could see the sink holes from a certain angle, so I filled them.

Sanded down the mold lines on each pipe of the two manifolds.  

The engine lid has some fitment problems. Tried heating it and running it under hot water to try and bend it but not much luck. Will have to figure something out.

Muffler pieces were put together, filled, and sanded.